Components needed to create a custom VHF “Jungle Antenna”.
- 1 – split-post BNC Adapter (aka “Cobrahead”)
- 10′ of Wire (Brown or Black)
- 5 – Ring Terminals
- 4 – cable ties
- An instruction sheet
You will need to get the following:
- a length of 550 or other cordage to hang your antenna in a tree
- Three straight sticks or rods about 2′ long
- A BNC cable and BNC-to-SMA adapter to connect to your radio.
You will need to use a wire cutter, stripper, and crimper to complete this kit.